Welcome to the Model 7 Web Interface (GUI) online example.

Model 7 5G Modem

FCC ID No. XMR2020RM502QAE

System Time: Displays Current Date and Time

These buttons will help with connection to the tower.

The connection control is used to reconnect to the neighborhood tower, use only when experiencing connection issues. You will first need to release the previous connection by clicking on Disconnect and then click on Reconnect to reestablish Internet connection.

Connection Status: Connected – This means the modem has a valid connection to the internet and is actively passing broadband data.
Internet Source Priority:

You can choose the type of internet connection you want to use like WIRED WAN or SIM card connections:

  • Wired WAN Only
  • SIM 1 > SIM2 Only
  • Wired WAN First then SIMs
  • SIM 1 Only
  • SIM 2 Only
Sim Card Status:

Not Card inserted – This means the modem is NOT reading the SIM card correctly. Also, can be an indication that the APN is not set correctly.

Card inserted – This means the modem is reading the SIM card correctly.

Signal Strength: This is the 5G radio reception (RSRP) score. It is important to try and keep this number under -100 for the best signal.
Signal Quality: This is the 5G radio signal quality (RSRQ) score. It is important to try and keep this number under -10 for the best wireless experience. This score can be affected by nearby devices.
Tower (CELL) ID: This is the neighborhood tower public identification number.
Channel: 41 – This is the modems PRIMARY (PCC) connection channel.
Carrier Aggregation: 2, 4– This is the modems CA channels (SCC) connection channel(s). What is Carrier Aggregation? Carrier aggregation is used in 5G and LTE in order to increase the bandwidth by combining several channels into one channel, which thereby increase the bitrate and data speeds.
Network type:

This is the modems mobile broadband connection method:

  • 5G-SA – Means 5G is the connection method without LTE.
  • 5G-NSA – Means 5G is the primary connection method with LTE channels helping.
  • LTE – Means 4G LTE is the primary connection method.
  • UTMS/HSPA+– Means 3G is the primary connection method.
Current APN: Access point name is used by the Internet provider to connect your SIM card to the appropriate service provider. This APN is provided to you by the operator and normally is preprogrammed into your device.
Session Uptime: This timer indicates how long the modem has been on and passing data.
ISP: This is current common carriers network you are connected to.
IMEI: This is modems identification number for the common carrier.
ICCID: This is the modems physical SIM card number.
Module Manufacturer: This is the communication radio card manufacturer.
Cellular Module: This is the communication radio card model and firmware number.
Internet Network (WAN) – Information from the common carrier.
IPv4 Address WAN: The IP address provided by the carrier assigned to your device.
Gateway WAN: The IP address of the carrier’s master device.
DNS: The primary Dynamic Name servers used by the common carrier.
Secondary DNS: The secondary Dynamic Name servers used by the common carrier.
Local Network (LAN) – Information about your local network.
Local IP: This is your modems WEB access address. (Gateway address)
Local Netmask: This is your modems NETMASK access address. (Gateway address)
MAC Address:  This is your modems unique MAC address. (Gateway address)